How Corks Are Made

7%

Review and Herald Publishing Assn. · Washington, D. C. · May 30, 1905

FromThe Youth's Instructor, Vol. LIII, No. 22

Read the full edition

How Corks Are Made

CORK, as most persons know, is the outer bark of an evergreen oak-tree which grows in Spain, Portugal, Algeria, Morocco, and to some extent in Italy. Its peculiar properties, especially its lightness and its compressibility, make it valuable for scores of purposes, but its original use, in the manufacture of corks, or stoppers for bottles, still consumes the greater part of all that is brought to market.
The cork oak varies in diameter from six inches to three feet. By a generous provision of nature, the tree may be periodically stripped of its outer bark without losing its life.
Twenty years is the usual age at which the first cutting is made. After that the cork may be harvested about every ten years. The first cut, which is called virgin bark, is of little value, as it is coarse in texture and deeply seamed. The tree may be expected to live and yield cork until it is one hundred fifty years old.
In Spain and some other European countries corks are still made by hand, each one being pared from a square block by a common knife.
In this country, where are made the finest corks in the world, the work is done by machinery, all of which is of American invention and manufacture. Every boy who has ever whittled a cork for a fishing “bob” or a pop-gun pellet knows how difficult the material is to cut smoothly. To do it well his knife must be as sharp as a razor, and must be used with a drawing motion, not a mere pressure; and if the cork be wet, so much the better. The same difficulties confront the manufacturer by machinery, and are met in the same way.
The bark, after having been wet, and then allowed to remain for a time in damp cellars to soften, goes first to the stripping-machines, which reduce it to slabs of a size proportionate to the corks to be made. These machines are merely small iron tables, through which appear very thin steel disks, like circular saws, except that they have no teeth. They are really keen-edged steel knives, as thin as paper, and running at a high rate of speed, but so smoothly that they seem to the spectator to be standing still.
THE OCTOPUS, OR DEVILFISH
THE OCTOPUS, OR DEVILFISH
The little slabs or strips of cork go next to the “blockers.” The cutters here are cylindrical steel punches, or tubes, with razor edges. They are arranged in rows or “gangs,” and instead of being simply pressed through the cork, are also revolving at high speed, and so cut their way through. Having perforated the slab, the cutters back away automatically, while plungers like pistons working in the cylinders come forward and punch out the cores, which, for some purposes, are already finished corks.
They are, of course, perfectly cylindrical, that is, without taper, and in that form they are preferred by bottlers of effervescent liquids because their shape enables them the better to resist the pressure of the restrained gases.
But for the use of druggists, who are the great users of corks and need the very finest, a tapering stopper is preferred, and this necessitates another operation. The tapering-machines are run mostly by young women. Each machine consists of a little lathe which centers the cylindrical cork automatically, and then brings it into contact with the edge of the cutting-knife, which, like the cutter of the slicing-machine, is a very thin steel disk. As the cork touches this knife, a thin shaving rises and curls away, light as a puff of smoke.
One who knows nothing of the machinery could see no reason for it, but during the second that the cork has been in contact with the apparently motionless disk some dozen yards of flying, razor-edged steel have been at work, and the cork is now a perfect truncated cone, with a fine, satin-like surface and an even and regular taper. By hand, a very rapid and skilful cutter can turn out twelve or fourteen gross in a day. With these machines one girl will produce four hundred twenty gross.
There are few businesses in which the quantity of waste material is so large as in the manufacture of corks. In the best-managed factories it ranges from sixty to seventy per cent; but American ingenuity and industrial development have succeeded in transforming it into a source of profit. By grinding the waste to various degrees of fineness and pressing it, with glue or shellac, into various shapes, it is made useful for the inner soles of shoes, for bath-room mats, for insulation in refrigerating plants, and the deadening of sound in apartment-houses, the making of bicycle handles and the grips of tennis rackets, fly-rods and golf clubs; and there are dozens of other uses for the waste which are quite as interesting.
A few years ago one manufacturer of corks was paying a teamster a dollar a load to cart away his waste and dump it on a refuse heap. To-day he receives sixty dollars a ton for the very cheapest quality of this waste.—Edward Williston Frentz, in Youth’s Companion.