It is an interesting fact that one of the most useful, indeed one of the most necessary, articles in the world is so cheap that no man hesitates to ask even a stranger for it, or dreams of paying him except by the conventional “Thank you.” That matches have come to occupy this position is due largely to American inventive skill.
The first friction-matches were made and dipped by hand. They sold for about three dollars a gross. To-day all matches are made, and most of them are dipped, by machinery, and one can buy from fifty to seventy-five for a cent. Between these two extremes stretches a long line of complicated and interesting machines.
Inventors began very early to give their attention to devices for making the sticks, or splints, cheaply. One plan after another was tried, until all finally gave way to the ribbon method. The machine for this process is a sort of lathe, in which is placed a cylinder of pine wood the length of seven matches. As this cylinder, previously soaked in hot water, or steamed, to make it soft and tough, is turned slowly, the circumference encounters a blade, which pares off a continuous shaving the whole length of the cylinder, and the thickness of a single match. This shaving, as it peels away from the log, again comes in contact with cutters, which divide it into seven strips, each as wide as a match is long.
When the ribbons have been cut into manageable length—say seven or eight feet—and freed from knots and crooked-grained portions, a large number of them—from one hundred twenty to one hundred forty—are placed in a machine like an ordinary paper-cutter. The mass is fed forward automatically, the width of a match at a time, and the descending cutter slices through the mass, making from one hundred twenty to one hundred forty splints at a stroke.
The splints are now dried and sifted in partitioned sieves, the motion of which lays the matches parallel, and prepares them for their places in frames, where they are dipped by hand. Some of these machines will turn out from fifteen to seventeen million splints a day. Rapid and cheap as this method is, it has been superseded in America by another system in which the hand work is reduced to a minimum. The raw material in this case is two-inch white plank. This is first sawed into blocks the length of a match, and thoroughly dried. The blocks are clamped to the bed of a machine, and cutters groove out a set of splints from the surface, not, however, taking the whole surface and converting it into splints at one impact, but cutting the matches out one fourth of an inch apart.
The splints, thus separated, are seized in iron clamp plates, which form an endless chain. These carry the splints across a steam-heated drum, which warms them nearly to the temperature of the melted paraffin into which they are next dipped. The heat prevents the paraffin from chilling, and insures a proper saturation.
From the first order to march, these companies of wooden soldiers have no permission to halt. They move on continuously and evenly from the paraffin bath to the rollers which carry the “heading mixture,”—phosphorus, chlorate of potash, and other substances,—and, as the companies pass by, these rollers place a red or a blue cap on the head of each individual. The line of march continues on through a room swept by a blast of cold, dry air, which hardens the newly deposited chemicals until the matches can be safely handled.
Still the companies march, until, just before they reach the starting-point again, the individual units receive their final order to “fall out” from an automatic and uncompromising punch, which deposits them side by side in a box placed in just the right place, and at just the right time, by another endless belt, a unique device.p. 7
The cutters, meanwhile, have been eating away the ridges which were left between the places from which the first set of splints was cut; and so it goes until the whole block has been converted into slim little red- or blue-capped fellows, each one snappish and full of fire.—Edward Williston Frentz, in Youth’s Companion.