Making Glass Walls for Buildings

20%

Review and Herald Publishing Assn. · Washington, D. C. · February 21, 1905

FromThe Youth's Instructor, Vol. LIII, No. 8

Read the full edition

Making Glass Walls for Buildings

An architect, in the State of Iowa, has devised a method of using glass for the outer walls of residences and public buildings superior to all other materials. His system provides for a steel framework supported by brackets attached to the beams of the floors, in duplicate, making two walls of opalescent wire glass, the glass being set in the framework. The glass walls are, approximately, a foot apart, making an insulating dead-air space to prevent loss of heat in winter and undue heat in summer.
This system of construction allows of any arrangement of floor plan, because windows are unnecessary. The exterior will admit of any style of treatment. The glass wall is fire-resisting to a practical degree. It has been demonstrated that wire glass will resist a hot fire.
The inside treatment allows of a marble wainscoting half-way to the ceiling, with glass over, so that wall space is available for desks, counters, and shelving on all sides of a room. At the same time more light is produced than with windows. The cost, compared to stone, terra-cotta, or brick, would be from a quarter to a third less for the outer walls.—Search-Light.
GABLE END OF HOUSES
GABLE END OF HOUSES